Old, damaged, cracked, or unwanted tiles may need to be removed before new flooring or wall finishes can be installed. Tile hacking in Singapore is commonly required during renovation, bathroom upgrades, kitchen improvements, flooring replacement, and other property repair projects.
One Hub Integrated Pte Ltd provides tile hacking services in Singapore to help prepare floors and walls for the next stage of renovation. The work can be carried out as part of a larger renovation project or where tile removal is the main requirement.
Started in 2021, One Hub Integrated has served 150+ clients across Singapore.
Tile hacking is the process of removing existing tiles and the material beneath them so the surface can be prepared for new finishes.
Depending on the property and existing installation, tile hacking may involve:
The exact method depends on the tile type, installation, surface condition, and location.
Tile hacking may be required in several renovation situations.
Old tiles may no longer match the property’s design or may have become worn over time. Removing the existing tiles can prepare the surface for a new installation.
Multiple cracked or damaged tiles may indicate that replacement is needed. Depending on the extent of the problem, removing the existing tiles may be necessary before installing new ones.
Bathrooms are frequently renovated with new wall and floor tiles. Existing tiles may need to be removed before new finishes are installed.
For a complete bathroom renovation project, see our Bathroom Renovation Singapore page.
Kitchen floors and walls may also require tile removal during renovation. Old tiles can be hacked before new kitchen finishes are installed.
You can learn more about our Kitchen Renovation Singapore service.
If you want to replace an existing tiled floor with a new tile design or another suitable finish, the old tiles may need to be removed first.
Our tile hacking work can cover different areas of a property, depending on the renovation requirements.
Floor tiles can be removed when the existing flooring needs to be replaced or the underlying surface requires attention.
Wall tiles may need to be removed during bathroom, kitchen, or other renovation work.
The surrounding surfaces should be protected as much as reasonably possible during the removal process.
Bathrooms often involve both floor and wall tiles. Tile hacking may therefore be one of the early stages of a bathroom renovation.
After removal, the surface may require further preparation before new tiles are installed. Our Bathroom Tiling Singapore service can be considered for the next stage of the renovation.
Kitchen tile removal may involve floor tiles, backsplash areas, or other tiled surfaces.
The location of plumbing and electrical services should be considered when working around kitchen walls and floors. For related renovation work, see our Kitchen Renovation Singapore page.
Tile hacking may be part of an HDB renovation project, but the proposed renovation work should comply with the applicable requirements for the property.
Before starting, it is important to understand whether the planned tile removal and replacement work requires any specific approval, timing, or other arrangements.
Our HDB Renovation Singapore page provides more information about renovation requirements for HDB properties.
Condominium renovation projects may also require tile hacking when owners are replacing existing finishes.
However, each development may have its own renovation guidelines and management requirements. These should be checked before work begins.
For broader renovation requirements, see our Cndo Renovation Singapore page.
Office floors and tiled areas may need to be upgraded when a business changes its interior or replaces worn finishes.
Tile hacking can be used to remove existing tiles before new flooring or tiles are installed.
Office projects should also consider building management requirements, access, working hours, and the effect of hacking work on nearby areas.
For a complete office renovation, visit our Office Renovation Singapore page.
Removing the tiles is only one part of the renovation process.
Once the existing tiles have been removed, the surface may need to be:
The next step depends on the condition of the surface and the planned finish.
For new floor tiles, you can explore our Floor Tile Installation Singapore service.
For general tiling requirements, see Tiling Services Singapore.
Bathrooms, toilets, kitchens, and other wet areas may require waterproofing as part of a wider renovation.
If tiles are removed from a wet area, the condition of the existing waterproofing system should be considered before new finishes are installed.
Where waterproofing work is required, you can explore our Waterproofing Services Singapore and Toilet & Bathroom Waterproofing Singapore services.
Tile hacking itself should not be treated as a solution to water leakage. If there is an active leak, the source should be identified and repaired appropriately.
Damaged tiles are not always the cause of water leakage.
Water problems can come from plumbing, joints, waterproofing issues, or other sources. If leakage is present, it is important to identify the source before simply replacing the tiles.
Our Water Leakage Inspection Singapore service may be relevant when a wet-area renovation involves suspected leakage.
Tile hacking and tile regrouting are very different services.
Tile hacking involves removing existing tiles and preparing the area for further work.
Tile regrouting involves removing or replacing deteriorated grout between existing tiles without necessarily removing the tiles themselves.
If your tiles are still in suitable condition but the grout is damaged or discoloured, Tile Regrouting Singapore may be a more suitable option.
The exact process varies depending on the project, but a typical tile hacking project can involve several stages.
The existing tiles, surface condition, location, and renovation requirements are considered.
The area is prepared based on the scope of tile removal and the work that needs to follow.
The existing tiles are carefully removed using suitable equipment and methods for the project.
Loose tile pieces and other removed materials are cleared from the work area according to the agreed project scope.
The underlying surface is assessed to determine whether further preparation or repair is needed.
The area can then be prepared for new tiles or another suitable finish.
There is no single timeframe for every tile hacking project. The duration can depend on:
Yes. Tile hacking involves breaking and removing hard materials, so noise, dust, and debris can be expected.
For occupied homes or offices, the work should be planned carefully. Furniture, equipment, nearby finishes, and access routes should be considered before work begins.
For condominium or commercial properties, the applicable building management requirements should also be checked.
Yes, tile hacking can focus specifically on removing tiles and related surface materials rather than removing the entire wall.
However, the exact scope depends on the existing construction and what is required for the renovation.
If an entire wall or wall section needs to be removed, our Wall Hacking Singapore service is more relevant.
One Hub Integrated Pte Ltd provides tile hacking as part of a wider range of renovation and property-related services in Singapore.
Our company details include:
Along with hacking services, we provide renovation, tiling, waterproofing, painting, electrical, plumbing, and ceiling and partition services.
This allows tile removal to be coordinated with other renovation requirements when several types of work are needed.
Tile hacking is the removal of existing floor or wall tiles and, where required, the material beneath them to prepare the surface for new renovation work.
Yes. Bathroom floor and wall tiles can be removed as part of bathroom renovation work, subject to the property’s applicable requirements.
Yes. Kitchen floor, wall, or backsplash tiles may be removed when the area is being renovated or the existing tiles need replacement.
Yes. Tile hacking can be limited to a specific floor area if that matches the renovation requirements.
Not necessarily. Whether existing tiles need to be removed depends on the condition of the existing surface, the new installation method, and the requirements of the project.
The underlying surface can be affected during tile removal, particularly depending on how the existing tiles were installed. After hacking, the surface should be inspected and prepared before new finishes are installed.
The cost depends on the area size, tile type, installation method, access, amount of hacking required, debris handling, and additional preparation work. A project-specific assessment is needed for an accurate quotation.
Requirements can depend on the property type and the planned renovation work. HDB, condominium, commercial, and other properties may have different requirements. The applicable rules should be checked before starting the project.
If you are replacing old bathroom tiles, upgrading a kitchen floor, changing office flooring, or preparing a property for renovation, professional tile hacking can help prepare the area for the next stage.
One Hub Integrated Pte Ltd provides tile hacking services in Singapore for different renovation requirements.
One Hub Integrated Pte Ltd
18 BOON LAY WAY, #09-127 TRADEHUB 21
SINGAPORE 609966
Trade License No.: 202300076N
Started in 2021
150+ clients served across Singapore
